Makita HK1820 Datasheet download pdf (Page 3)

ENGLISH (Original instructions)

Explanation of general view

1-1. Lock button

1-2. Switch trigger

2-1. Adjusting dial

3-1. Bit

3-2. Chuck cover

4-1. Chuck cover

6-1. Change ring

7-1. Change ring

8-1. Hook

8-2. Power supply cord

8-3. Extension cord

10-1. Scaling chisel

10-2. Tile

SPECIFICATIONS

Model HK1820

Blows per minute (min

-1

) 0 - 3,200

Overall length 351 mm

Net weight 3.4 kg

Safety class II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

ENE047-1

Intended use

The tool is intended for chiselling work in concrete, brick

and stone as well as for driving and compacting with

appropriate accessories.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

) : 83 dB(A)

Sound power level (L

) : 94 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode : chiseling

Vibration emission (a

h,CHeq

) : 10.0 m/s

Uncertainty (K) : 1.5 m/s

ENG901-1

•

The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-14

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Power Scraper

Model No./ Type: HK1820

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd.

Michigan Drive, Tongwell,

Milton Keynes, MK15 8JD, England

1 2 3 4 5 6 7 8 ... 31 32

Comments to this Manuals

No comments

Makita HK1820 Datasheet Page 3

Comments to this Manuals