Makita 9207SPB User Manual download pdf (Page 6)

Installing or removing the wool bonnet

Fig.4

Mount the rubber pad onto the spindle. Screw the lock

nut onto the spindle.

To tighten the lock nut, hold the spindle with the wrench

so that it cannot revolve, then use the lock nut wrench

and securely tighten clockwise.

Fit the wool bonnet completely over the rubber pad and

pull the string tight. Tie a bow knot and tuck the knot

and any loose strings between the wool bonnet and the

rubber pad.

Fig.5

To remove the wool bonnet, follow the installation

procedure in reverse.

OPERATION

Polishing operation

Fig.6

CAUTION:

• Always wear safety glasses or a face shield during

operation.

Hold the tool firmly. Turn the tool on and then apply the

wool bonnet to the workpiece.

In general, keep the wool bonnet at an angle of about

15 degrees to the workpiece surface.

Apply slight pressure only. Excessive pressure will

result in poor performance and premature wear to wool

bonnet.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection

or maintenance.

• Never use gasoline, benzine, thinner, alcohol or

the like. Discoloration, deformation or cracks may

result.

Replacing carbon brushes

Fig.7

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps.

Take out the worn carbon brushes, insert the new ones

and secure the brush holder caps.

Fig.8

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers,

always using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are

recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Wool bonnet 180

• Wrench 17

• Rubber pad 170

• Lock nut 48

• Lock nut wrench 28

• Side grip (auxiliary handle)

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ

from country to country.

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

Comments to this Manuals

No comments

Makita 9207SPB User Manual Page 6

Comments to this Manuals

Related products and manuals for Power sanders Makita 9207SPB