Makita AF505 Instruction Manual download pdf (Page 2)

ENGLISH

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

USB087-1

IMPORTANT SAFETY INSTRUC-

TIONS

WARNING: WHEN USING THIS TOOL, BASIC

SAFETY PRECAUTIONS SHOULD ALWAYS BE FOL-

LOWED TO REDUCE THE RISK OF PERSONAL

INJURY, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS.

1. For personal safety and proper operation and

maintenance of the tool, read this instruction

manual carefully before using the tool.

2. Always wear safety glasses to protect your

eyes from dust or nail injury. The safety glasses

should conform with the requirements of ANSI

Z87.1.

WARNING:

It is an employer’s responsibility to enforce the

use of safety eye protection equipment by the

tool operators and by other persons in the

immediate working area.

3. Wear hearing protection to protect your ears

against exhaust noise and head protection.

Also wear light but not loose clothing. Sleeves

should be buttoned or rolled up. No necktie

should be worn.

4. Rushing the job or forcing the tool is danger-

ous. Handle the tool carefully. Do not operate

when under the influence of alcohol, drugs or

the like.

5. General Tool Handling Guidelines:

(1) Always assume that the tool contains fas-

teners.

(2) Do not point the tool toward yourself or

anyone whether it contains fasteners or

not.

(3) Do not actuate the tool unless the tool is

placed firmly against the workpiece.

(4) Respect the tool as a working implement.

(5) No horseplay.

(6) Do not hold or carry the tool with a finger

on the trigger.

(7) Do not load the tool with fasteners when

any one of the operating controls is acti-

vated.

(8) Do not operate the tool with any power

source other than that specified in the tool

operating/safety instructions.

6. An improperly functioning tool must not be

used.

7. Sparks sometimes fly when the tool is used. Do

not use the tool near volatile, flammable materi-

als such as gasoline, thinner, paint, gas, adhe-

sives, etc.; they will ignite and explode, causing

serious injury.

8. The area should be sufficiently illuminated to

assure safe operations. The area should be

clear and litter-free. Be especially careful to

maintain good footing and balance.

9. Only those involved in the work should be in

the vicinity. Children especially must be kept

away at all times.

10. There may be local regulations concerning

noise which must be complied with by keeping

noise levels within prescribed limits. In certain

cases, shutters should be used to contain

noise.

11. Do not play with the contact element: it pre-

vents accidental discharge, so it must be kept

on and not removed. Securing the trigger in the

ON position is also very dangerous. Never

attempt to fasten the trigger. Do not operate a

tool if any portion of the tool operating controls

is inoperable, disconnected, altered, or not

working properly.

Model AF505

Air pressure

4.0 - 8.0 kgf/cm

G (60 - 115 PSIG)

Nail length 15 mm (5/8”) - 50 mm (2”)

Nail capacity 100 pcs.

Min. hose diameter 6.5 mm (1/4”)

Dimensions (L X H X W) 260 mm X 64 mm X 237 mm (10-1/4” X 2-1/2” X 9-5/8”)

Net weight 1.4 kg (3.01 lbs)

1 2 3 4 5 6 7 ... 27 28

Comments to this Manuals

No comments

Makita AF505 Instruction Manual Page 2

Comments to this Manuals