Makita LS0815F Use and Care Manual download pdf (Page 9)

result in unintentional operation and serious

personal injury. Return tool to a Makita service

center for proper repairs BEFORE further usage.

• NEVER defeat the lock-off button by taping down

or some other means. A switch with a defeated

lock-off button may result in unintentional

operation and serious personal injury.

Electric brake

This tool is equipped with an electric blade brake. If the

tool consistently fails to quickly stop the blade after the

switch trigger is released, have the tool serviced at a

Makita service center.

CAUTION:

• The blade brake system is not a substitute for

the blade guard. Never use tool without a

functioning blade guard. An unguarded blade

may result in serious personal injury.

Electronic function

Soft start feature

• This function allows the smooth start-up of the tool

by limiting the start-up torque.

Laser beam action

For model LS0815FL only

NOTE:

• Before the first use, install the dry cells provided

separately from the tool in the cell box. Refer to

the section titled "Replacing the dry cells for laser

unit" for the installment.

CAUTION:

• When not in use, be sure to turn off the laser

014271

CAUTION:

• LASER RADIATION

Do not stare into beam.

• Before shifting the laser line or performing

maintenance adjustment, be sure to unplug the

tool.

To turn on the laser beam, press the upper position

(ON) of the switch. To turn off the laser beam, press the

lower position (OFF) of the switch.

Laser line can be shifted to either the left or right side of

the saw blade by loosening the screw holding the laser

unit box and shifting it in the desired direction. After

shifting, be sure to tighten the screw.

014275

Laser line is factory adjusted so that it is positioned

within 1 mm (0.04") from the side surface of the blade

(cutting position).

NOTE:

• When laser line appears dim and hard to see

because of direct sunlight, relocate the work area

to a place where there is less direct sunlight.

Cleaning of the lens for the laser light

If the lens for the laser light becomes dirty, or sawdust

adheres to it in such a way that the laser line is no

longer easily visible, unplug the saw and remove and

clean the lens for the laser light carefully with a damp,

soft cloth. Do not use solvents or any petroleum-based

cleaners on the lens.

NOTE:

• When laser line is dim and almost or entirely

invisible because of the direct sunlight in the

indoor or outdoor window-by work, relocate the

work area to a place not exposed to the direct

sunlight.

Light action

014270

1. Light

1. Switch for laser

1. Screw holding the laser unit bo

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 67 68

Comments to this Manuals

No comments

Makita LS0815F Use and Care Manual Page 9

Comments to this Manuals

Related products and manuals for Mitre saws Makita LS0815F