Makita LM2300 Instruction Manual download pdf (Page 6)

1. Over current

relay

• If the electric lawn mower is used while grass cuttings

and other dirt are blocking the inside of the main unit,

the over current relay will operate, automatically

stopping the device. In such cases, unplug the power

cord from the power socket, clean out the material

causing the blockage, press the Recovery Button, and

then restart mowing.

• Be sure to press the Recovery Button at least ten

seconds after the device has stopped.

NOTE:

• The over current relay may be activated when wet or

long grass gets caught up inside of the main unit.

Connecting Extension Cord (available in

market)

WARNING:

When connecting extension cord to the power supply

cord, make sure the Power Switch is OFF and the

cord is unplugged from the power socket.

• If the power connection is made with the Power Switch

ON, the device will start operating suddenly, which may

cause an accident.

• When connecting the extension cord to the power plug

of the main unit of the device, be sure to insert the

cord’s plug fully.

1. Hook

2. Extension cord

• When connecting the extension cord, hook it over the

support hook as shown in the figure, to prevent

inadvertent unplugging, but make sure there is no

excessive strain on the plug connection.

Waist Hook for Power Cord

CAUTION:

Do not attach any item other than the extension cord

to the holder section of the waist hook for power

cord.

• Using the waist hook for power cord for purposes other

than intended may cause an accident and/or injury.

1. Hook

2. Waist hook

3. Holder

1. A section

2. Holder

• Using the waist hook for power cord helps prevent

careless severing of the extension cord due to the cord

being loose.

• Hook the hook section of the waist hook for power cord

into clothing or belt at waist height.

• To use the Waist Hook for Power Cord, place the

holder in your hand, and hook the hooked section (A

section) into clothing or belt at waist height, and then

clip the power cord into the holder with one touch.

• Be sure to clip in and clip out the power cord from the

mouth of the holder.

1. Holder

2. Power cord

NOTE:

• Do not apply excessive strength to the mouth of the

holder. Doing so may cause misshaping or damage to

the holder.

OPERATION

Mowing

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Makita LM2300 Instruction Manual Page 6

Comments to this Manuals

Related products and manuals for Lawnmowers Makita LM2300