Makita SP6000 Instruction Manual download pdf (Page 7)

19. Do not stop the blades by lateral pressure on

the saw blade.

20. Always use blades recommended in this

manual. Do not use any abrasive wheels.

21. Wear a dust mask and hearing protection

when use the tool.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on

the tool.

Adjusting depth of cut

007656

CAUTION:

• After adjusting the depth of cut, always tighten the

clamping screw securely.

Loosen the clamping screw on the depth guide and

move the blade lower limit stopper to the desired depth

on the scale plate. At the desired depth of cut, tighten

the clamping screw firmly.

For cleaner, safer cuts, set cut depth so that no more

than one blade tooth projects below workpiece. Using

proper cut depth helps to reduce potential for dangerous

KICKBACKS which can cause personal injury.

NOTE:

• Setting the blade lower limit stopper to the desired

depth on the scale plate allows rough depth of cut.

For accurate depth of cut, measure the actual

protrusion of saw blade below the tool base.

Quick stop button for 2 to 3 mm depth of cut

when using guide rail (accessory)

007669

This tool has the quick stop button for 2 to 3 mm depth of

cut on the gear housing aside the rear handle when

using guide rail. This is used when avoiding splinter on

the workpiece in the cut. Make a pass of the 2 to 3 mm

first cut and then make another pass of usual cut.

To obtain the 2 to 3 mm depth of cut, push in the stop

button toward the saw blade. This is convenient for

avoiding splinter on the workpiece.

To release the depth of cut from this position for free

depth of cut, just pull the button back.

007670

Bevel cutting

007657

1. Clamping

screws

2. Tool base

1. Quick stop

button

1. Quick stop

button

1. Clamping screw

2. Blade lower limit

stopper

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comments to this Manuals

Tim 16 Nov 2024 | 18:18:29

000

Makita SP6000 Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Hand tools supplies Makita SP6000