Makita UH5261 User Manual download pdf (Page 8)

NOTE:

• When replacing the chip receiver, always wear

gloves so that hands and face does not directly

contact the blade. Failure to do so may cause

personal injury.

• Always be sure to remove the blade cover before

installing the chip receiver.

• The chip receiver receives cut-off leaves and

alleviates collecting thrown-away leaves. This can

be installed on either side of the tool.

Fig.15

Fig.16

At this time, the chip receiver needs to be installed so

that its hooks fit into grooves in the shear blade unit.

Fig.17

To remove the chip receiver, press its lever on both sides

so that the hooks are unlocked.

CAUTION:

• The blade cover (standard equipment) cannot be

installed on the tool with the chip receiver being

installed. Before carrying or storing, uninstall the

chip receiver and then install the blade cover to

avoid blade exposure.

NOTE:

• Check the chip receiver for secure installment

before use.

• Never try to uninstall the chip receiver by an

excessive force with its hooks locked in the blade

unit grooves. Using the excessive force may

damage it.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection

or maintenance.

Cleaning the tool

Clean out the tool by wiping off dust with a dry or

soap-dipped rag.

CAUTION:

• Never use gasoline, benzine, thinner, alcohol or

the like. Discoloration, deformation or cracks may

result.

Blade maintenance

Smear the blade before and once per half an hour during

operation using machine oil or similars.

After operation, remove dust from both sides of the

blade with wired brush, wipe off it with a rag and then

apply enough low-viscosity oil, such as machine oil etc.

and spray-type lubricating oil.

CAUTION:

• Do not wash the blades in water. Failure to do so

may cause rust or damage on the tool.

• Wear gloves when performing the blade

maintenance.

Storage

Put the blade cover on the shear blades so that the

blades are not exposed. Store the tool out of the reach of

children carefully.

Store the tool in the place not exposed to water and rain.

To maintain product SAFETY and RELIABILITY, repairs,

carbon brush inspection and replacement, any other

maintenance or adjustment should be performed by

Makita Authorized Service Centers, always using Makita

replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

• These accessories or attachments are

recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Blade cover

• Hook complete

• Waist cord hook

• Arm cord hook

• Chip receiver

NOTE:

• Some items in the list may be included in the tool

package as standard accessories. They may differ

from country to country.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Comments to this Manuals

No comments

Makita UH5261 User Manual Page 8

Comments to this Manuals

Related products and manuals for Grass trimmers Makita UH5261