Makita 4190D/4190DW Instruction Manual download pdf (Page 4)

ENGLISH

Explanation of general view

1 Set plate

2 Battery cartridge

3 Charging light

4 Tank holder installing portion

5 Tank

6 Screw (A)

7 Screw (B)

8 Tank holder

9 Diamond wheel

0 Bolt

q Flange

w Blade stopper pin

e Tighten

r Loosen

t Hex wrench

y Depth guide

u Bolt (A)

i Bevel scale plate

o Bolt (B)

p Blade case

a Base

s For straight cuts

d For 45° bevel cuts

f Lock-off lever

g Switch trigger

h Cap

SPECIFICATIONS

Model 4190D 4190DB

Wheel diameter ............................................................................ 80 mm 80 mm

Cutting depth

90° ............................................................................................. 0 – 18 mm 0 –18 mm

45° ............................................................................................. 0 – 16 mm 0 – 16 mm

No load speed (min

-1

) .................................................................. 1,000 1,000

Overall length ............................................................................... 313 mm 313 mm

Net weight .................................................................................... 1.9 kg 1.9 kg

Rated voltage ............................................................................... D.C. 9.6 V D.C. 9.6 V

•

Due to our continuing program of research and

development, the specifications herein are subject

to change without notice.

•

Note: Specifications may differ from country to

country.

Safety hints

For your own safety, please refer to the enclosed

safety instructions.

IMPORTANT SAFETY INSTRUCTIONS

FOR CHARGER & BATTERY

CARTRIDGE

1. SAVE THESE INSTRUCTIONS — This manual

contains important safety and operating

instructions for battery charger.

2. Before using battery charger, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using

battery.

3. CAUTION — To reduce risk of injury, charge

only MAKITA type rechargeable batteries.

Other types of batteries may burst causing

personal injury and damage.

4. Do not expose charger to rain or snow.

5. Use of an attachment not recommended or

sold by the battery charger manufacturer may

result in a risk of fire, electric shock, or injury

to persons.

6. To reduce risk of damage to electric plug and

cord, pull by plug rather than cord when dis-

connecting charger.

7. Make sure cord is located so that it will not be

stepped on, tripped over, or otherwise sub-

jected to damage or stress.

8. Do not operate charger with damaged cord or

plug — replace them immediately.

9. Do not operate charger if it has received a

sharp blow, been dropped, or otherwise dam-

aged in any way; take it to a qualified service-

man.

10. Do not disassemble charger or battery car-

tridge; take it to a qualified serviceman when

service or repair is required. Incorrect reas-

sembly may result in a risk of electric shock or

fire.

11. To reduce risk of electric shock, unplug

charger from outlet before attempting any

maintenance or cleaning. Turning off controls

will not reduce this risk.

ADDITIONAL SAFETY RULES FOR

CHARGER & BATTERY CARTRIDGE

1. Do not charge battery cartridge when tempera-

ture is BELOW 10°C (50°F) or ABOVE 40°C

(104°F).

2. Do not attempt to use a step-up transformer,

an engine generator or DC power receptacle.

3. Do not allow anything to cover or clog the

charger vents.

4. Always cover the battery terminals with the

battery cover when the battery cartridge is not

used.

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any con-

ductive material.

(2) Avoid storing battery cartridge in a con-

tainer with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

4190D (E) (’100. 3. 17)

1 2 3 4 5 6 7 8 9 ... 17 18

Comments to this Manuals

No comments

Makita 4190D/4190DW Instruction Manual Page 4

Comments to this Manuals