Makita ML901 User Manual download pdf (Page 5)

For USA only

Recycling the Battery

Ni-Cd

The only way to dispose of a Makita battery is to recycle it. The law

prohibits any other method of disposal.

To recycle the battery:

1. Remove the battery from the tool.

2. a). Take the battery to your nearest Makita Factory Service Center

b). Take the battery to your nearest Makita Authorized Service Center or Distributor that has been

designated as a Makita battery recycling location.

•

Call your nearest Makita Service Center or Distributor to determine the location that provides Makita

battery recycling. See your local Yellow Pages under ‘‘Tools-Electric’’.

OPERATING INSTRUCTIONS

Charging

For ML702 (Fig. 1), ML902 (Fig. 1) and ML901 (Fig. 2)

Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, pull out the set plate

on the torch/flashlight and grasp both sides of the cartridge while withdrawing it from the torch/flashlight. After charging,

insert the battery cartridge into the torch/flashlight and snap the set plate back into place.

For ML903 (Fig. 3)

Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, withdraw it from the

torch/flashlight while pressing the buttons on both sides of the cartridge. After charging, insert the battery cartridge into

the torch/flashlight all the way until it locks in place with a little click.

NOTE:

Battery cartridge 9100, 9102, 9100A and 9102A can be used on ML903 if you install the set plate. Install the set plate

on ML903 with the screw provided as shown in Fig. 4.

The following tables indicate the charging time and operating time on a single charge.

ML702

Voltage Battery cartridge Operating time Charger

7.2 V

7000 Approx. 140 min.

DC7100, DC9710, DC9711,

DC1201, DC1411, DC1439,

DC1470, DC1422, DC1801

7002 Approx. 210 min.

DC9711, DC1201, DC1411,

DC1439, DC1422, DC1801

7033 Approx. 240 min.

DC9711, DC1411, DC1439,

DC1422, DC1801

ML901/ML903

Voltage Battery cartridge Operating time Charger

9.6 V

9100, 9100A, 9120 Approx. 160 min.

DC9710, DC9711, DC1201,

DC1411, DC1439, DC1470,

DC1422, DC1801

9102, 9102A, 9122 Approx. 230 min.

DC9711, DC1201, DC1411,

DC1439, DC1422, DC1801

9133 Approx. 260 min.

DC9711, DC1411, DC1439,

DC1422, DC1801

9134 Approx. 310 min.

9135, 9135A Approx. 360 min.

(Note)

If you use a power checking battery on Model ML901/ML903, the power checking battery will not indicate the remaining

battery capacity properly.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Makita ML901 User Manual Page 5

Comments to this Manuals

Related products and manuals for Flashlights Makita ML901