Makita LXLM04 User Manual download pdf (Page 4)

should be carried out by Makita Authorized Service

Center.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the battery

cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room temperature at

10 °C - 40 °C (50 °F - 104 °F). Let a hot battery

cartridge cool down before charging it.

4. Charge the battery cartridge once in every six months

if you do not use it for a long period of time.

FUNCTIONAL DESCRIPTION

Charging

Charge the battery cartridge with the Makita charger

before use.

Installing or removing battery cartridge

(Fig. 1)

CAUTION:

• Always switch off the tool before installing or removing

of the battery cartridge.

• Hold the tool and the battery cartridge firmly when

installing or removing battery cartridge. Failure to hold

the tool and the battery cartridge firmly may cause

them to slip off your hands and result in damage to the

tool and battery cartridge and a personal injury.

To remove the battery cartridge, slide it from the tool while

sliding the button on the front of the cartridge.

To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip it

into place. Insert it all the way until it locks in place with a

little click. If you can see the red indicator on the upper

side of the button, it is not locked completely.

CAUTION:

• Always install the battery cartridge fully until the red

indicator cannot be seen. If not, it may accidentally fall

out of the tool, causing injury to you or someone

around you.

• Do not install the battery cartridge forcibly. If the

cartridge does not slide in easily, it is not being inserted

correctly.

Lighting up the LED light (Fig. 2)

CAUTION:

• Do not look in the LED light or see the source of light

directly.

Push the switch to light up the LED light. To turn off, push

the switch again.

Battery protection system

The protection system is equipped, which automatically

cuts off the output power for its long service life. The light

goes off during operation when the remaining battery

capacity gets low. This is caused by the activation of

protection system and does not show the light trouble.

Remove the battery cartridge from the light and charge it.

Head angle (Fig. 3)

The head angle can be adjusted in 12 stages. Adjust as

desired.

Strap hook (Fig. 4, 5)

The strap hook is convenient for temporarily hanging the

tool.

The strap hook can be installed on the upper or lower ring

in accordance with usage.

MAINTENANCE

CAUTION:

• Never use gasoline, benzine, thinner, alcohol or the

like. Discoloration, deformation or cracks may result.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL ACCESSORIES

CAUTION:

These accessories or attachments are recommended for

use with your Makita tool specified in this manual. The

use of any other accessories or attachments might

present a risk of injury to persons. The accessories or

attachments should be used only in the proper and

intended manner.

• Makita genuine battery and charger

NOTE:

Some items in the list may be included in the tool package

as standard accessories. They may differ from country to

country.

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Makita LXLM04 User Manual Page 4

Comments to this Manuals

Related products and manuals for Flashlights Makita LXLM04