Makita BFR540RFE Datasheet download pdf (Page 8)

Fig.17

Use a screwdriver to remove two screws then remove

the front cover.

Fig.18

Raise the arm part of the spring and then place it in the

recessed part of the housing with a slotted bit

screwdriver of slender shaft or the like.

Fig.19

Use pliers to remove the carbon brush caps of the carbon

brushes. Take out the worn carbon brushes, insert the

new ones and replace the carbon brush caps in reverse.

Fig.20

Make sure that the carbon brush caps have fit into the

holes in brush holders securely.

Fig.21

Reinstall the front cover and tighten two screws securely.

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be

performed by Makita Authorized Service Centers, always

using Makita replacement parts.

ACCESSORIES

CAUTION:

• These accessories or attachments are

recommended for use with your Makita tool

specified in this manual. The use of any other

accessories or attachments might present a risk of

injury to persons. Only use accessory or

attachment for its stated purpose.

If you need any assistance for more details regarding

these accessories, ask your local Makita Service Center.

• Drywall screw strip

• Phillips bit

• Various type of Makita genuine batteries and

chargers

• Plastic carrying case

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

No comments

Makita BFR540RFE Datasheet Page 8