Makita XVJ02Z Use and Care Manual download pdf (Page 8)

Anti-splintering device

014121

For splinter-free cuts, the anti-splintering device can be

used. To install the anti-splintering device, move the tool

base all the way forward and fit it from the back of tool

base. When you use the cover plate, install the anti-

splintering device onto the cover plate.

CAUTION:

• The anti-splintering device cannot be used when

making bevel cuts.

Dust extraction

The dust nozzle (optional accessory) is recommended

to perform clean cutting operations.

013878

To attach the dust nozzle on the tool, insert the hook of

dust nozzle into the hole in the base.

014122

To secure the dust nozzle, tighten the clamp screw at

the front of the dust nozzle.

The dust nozzle can be installed on either left or right

side of the base.

014117

Then connect a Makita vacuum cleaner to the dust nozzle.

OPERATION

CAUTION:

• Always hold the base flush with the workpiece.

Failure to do so may cause blade breakage,

resulting in a serious injury.

NOTE:

• If the tool is operated continuously until the battery

cartridge has discharged, allow the tool to rest for

15 minutes before proceeding with a fresh battery.

014110

Turn the tool on without the blade making any contact

and wait until the blade attains full speed. Then rest the

base flat on the workpiece and gently move the tool

forward along the previously marked cutting line.

When cutting curves, advance the tool very slowly.

Bevel cutting

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before tilting the base.

014111

1. Cutting line

2. Base

1. Dust nozzle

2. Hose for vacuum

cleaner

1. Clamp screw

1. Dust nozzle

2. Base

1. Anti-splintering

device

2. Base

1 2 3 4 5 6 7 8 9 ... 36

Comments to this Manuals

No comments

Makita XVJ02Z Use and Care Manual Page 8

Comments to this Manuals

Related products and manuals for Cordless jigsaws Makita XVJ02Z