Makita DJV141 Instruction Manual

1 ENGLISH (Original instructions) INSTRUCTION MANUAL IMPORTANT: Read Before Using. Cordless Jig SawDJV141 DJV181 013927

10 123 013884 To tilt the base, loosen the bolt on the back of the base with the hex wrench. Move the base so that the bolt is positioned in

11 Metal cutting Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause significant blade wear. The underside of

12 secure the bolt securely. 123 013944 CAUTION: • Always use blades No. B-8, B-13, B-16, B-17 or 58 when using the guide rail and th

13

14

15

16 www.makita.comMakita Jan-Baptist Vinkstraat 2, 3070, BelgiumMakita Corporation Anjo, Aichi, Japan 885219B226

2 ENGLISH (Original instructions) SPECIFICATIONS Model DJV141 DJV181 Length of stroke 26 mm 26 mm Wood 135 mm 135 mm Mild steel 10 mm 10 mm Ma

3 ENH101-17 For European countries only EC Declaration of Conformity Makita declares that the following Machine(s): Designation of Machine: Cordless

4 ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Power tool use and care 17. Do not for

5 15. Always use the correct dust mask/respirator for the material and application you are working with. SAVE THESE INSTRUCTIONS. WARNING

6 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or chec

7 Position Cutting action ApplicationsFor cutting mild steel, stainless steel and plastics.For clean cuts in wood and plywood.Small orbit cutting acti

8 Then the tool keeps the speed until the tool is switched off. When temperature is low and there is less fluidity in grease, the tool

9 Anti-splintering device 21 013877 For splinter-free cuts, the anti-splintering device can be used. To install the anti-splintering device, move the