Makita 4329K Use and Care Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
8
Dust extraction
1
2
008095
Clean cutting operations can be performed by
connecting this tool to a Makita vacuum cleaner. Insert
the hose of the vacuum cleaner into the hole at the rear
of the tool. Lower the dust cover before operation.
NOTE:
Dust extraction cannot be performed when making
bevel cuts.
Rip fence (optional accessory)
CAUTION:
Always be sure that the tool is switched off and
unplugged before installing or removing
accessories.
1. Straight cuts
1
Steel base type
008096
When repeatedly cutting widths of 160 mm or less,
use of the rip fence will assure fast, clean, straight
cuts.
1
Aluminum base type
008097
To install, insert the rip fence into the rectangular
hole on the side of the base with the fence guide
facing down. Slide the rip fence to the desired
cutting width position, then tighten the bolt to
secure it.
1
2
3
4
Steel base type
002776
1
2
3
4
Aluminum base type
005454
2. Circular cuts
1
2
3
4
Steel base type
002777
1
2
3
4
Aluminum base type
005455
1
Steel base type
008098
1. Rip fence (Guide
rule)
1. Threaded knob
2. Pin
3. Rip fence (Guide
rule)
4. Fence guide
1. Treaded knob
2. Guide facing
3. Rip fence (Guide
rule)
4. Pin
1. Bolt
2. Fence guide
3. Hex wrench
4. Rip fence (Guide
rule)
1. Hex wrench
2. Bolt
3. Rip fence (Guide
rule)
4. Guide facing
1. Rip fence (Guide
rule)
1. Rip fence (Guide
rule)
1. Dust cover
2. Hose
Page view 7
1 2 3 4 5 6 7 8 9 ... 32

Comments to this Manuals

No comments