Makita LCT309W Use and Care Manual download pdf (Page 45)

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or

checking function on the tool.

Installing or removing battery cartridge

008797

•

Always switch off the tool before installing or

removing of the battery cartridge.

• To remove the battery cartridge, withdraw it from

the tool while pressing the buttons on both sides of

the cartridge.

• To install the battery cartridge, hold it so that the

battery cartridge front shape fits to that of the

battery installment opening and slip it into place.

Always insert it all the way until it locks in place with

a little click. If not, it may accidentally fall out of the

tool, causing injury to you or someone around you.

• Do not use force when installing the battery

cartridge. If the cartridge does not slide in easily, it

is not being inserted correctly.

Switch action

011763

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the switch trigger actuates

properly and returns to the "OFF" position when

released.

To start the tool, simply pull the switch trigger. Tool speed

is increased by increasing pressure on the switch trigger.

Release the switch trigger to stop.

Electric brake

This tool is equipped with an electric brake. If the tool

consistently fails to quickly stop after switch trigger

release, have tool serviced at a Makita service center.

Turning on the front lamp

011767

CAUTION:

• Do not look in the light or see the source of light

directly.

Pull the switch trigger to turn on the light. The lamp keeps

on lighting while the switch trigger is being pulled.

NOTE:

• Use a dry cloth to wipe the dirt off the lens of lamp.

Be careful not to scratch the lens of lamp, or it may

lower the illumination.

Reversing switch action

011764

This tool has a reversing switch to change the direction of

rotation. Depress the reversing switch lever from the A

side for clockwise rotation or from the B side for

counterclockwise rotation.

When the reversing switch lever is in the neutral position,

the switch trigger cannot be pulled.

CAUTION:

• Always check the direction of rotation before

operation.

• Use the reversing switch only after the tool comes

to a complete stop. Changing the direction of

rotation before the tool stops may damage the tool.

• When not operating the tool, always set the

reversing switch lever to the neutral position.

1. Reversing

switch lever

1. Lamp

1. Switch trigger

1. Button

2. Battery cartridge

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 63 64

Comments to this Manuals

No comments

Makita LCT309W Use and Care Manual Page 45

Comments to this Manuals

Related products and manuals for Cordless combi drills Makita LCT309W