Makita GA7010CF Instruction Manual

1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULATION IMPORTANT: Read Before Using. Angle GrinderGA7010C GA9010C 005003

10 onto the spindle. 1234 010828 When installing a diamond wheel or a abrasive cut-off wheel with its 7mm or more thick wheel body, mount the

11 12345678910111213235638925410111*1121314*314785*2Do not use Super flange and Ezynut together.Use Inner flange 78 and Outer flange 78 together. (Aus

12 Makita CorporationAnjo, Aichi, Japanwww.makita.com 884532C914

2 ENGLISH (Original instructions) SPECIFICATIONS Model GA7010C GA9010C Depressed center wheel diameter 180 mm 230 mm Spindle thread M14 M14 Rate

3 9. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces th

4 the power tool. Accessories running faster than their rated speed can break and fly apart. 5. The outside diameter and the thickness of your acces

5 e) Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickback and loss of control Safety Warnin

6 24. Do not leave the tool running. Operate the tool only when hand-held. 25. Do not touch the workpiece immediately after operation; it may be

7 switch trigger. Release the switch trigger to stop. For tool with the lock on and lock-off switch To p re ve nt th e swi tc h t ri gg e r fr o

8 Loosen the lever on the wheel guard. Mount the wheel guard with the protrusion on the wheel guard band aligned with the notch on the bear

9 and then apply the wheel or disc to the workpiece. In general, keep the edge of the wheel or disc at an angle of about 15 degrees to the workpiece s