Makita 4073D User Manual download pdf (Page 4)

ENGLISH

Explanation of general view

1 Rear cover

2 Battery Cartridge

3 Switch

4 Nozzle

5 Cleaner body

6 Extension wand (Straight pipe)

7 Corner nozzle

8 Front cover

9 Depress

10 Open

11 Dust bag

12 Hook front cover onto front lip

13 Close

14 Front lip

SPECIFICATIONS

Model 4073D

Capacity ................................................................500 ml

Continuous use

Battery 7000.................................High: Approx. 10 min.

Low: Approx. 20 min.

Battery 7002.................................High: Approx. 15 min.

Low: Approx. 30 min.

Overall length ......................................................383 mm

Net weight ..............................................................1.1 kg

Output ..............................................................D.C.7.2 V

• Due to the continuing program of research and devel-

opment, the specifications herein are subject to change

without prior notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for collecting dry dust.

Safety hints

For your own safety, please refer to enclosed safety

instructions.

IMPORTANT SAFETY INSTRUCTIONS

FOR CHARGER & BATTERY CARTRIDGE

ENC004-1

1. Before using battery cartridge, read all instruc-

tions and cautionary markings on (1) battery

charger, (2) battery, and (3) product using battery.

2. Do not disassemble battery cartridge.

3. If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

4. If electrolyte gets into your eyes, rinse them out

with clear water and seek medical attention right

away. It may result in loss of your eyesight.

5. Always cover the battery terminals with the bat-

tery cover when the battery cartridge is not

used.

6. Do not short the battery cartridge:

(1) Do not touch the terminals with any conduc-

tive material.

(2) Avoid storing battery cartridge in a container

with other metal objects such as nails, coins,

etc.

(3) Do not expose battery cartridge to water or

rain.

A battery short can cause a large current flow,

overheating, possible burns and even a break-

down.

7. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50°C (122°F).

8. Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

9. Be careful not to drop or strike battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before completely

discharged.

Always stop tool operation and charge the bat-

tery cartridge when you notice less tool power.

2. Never recharge a fully charged battery cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room tempera-

ture at 10°C – 40°C (50°F – 104°F). Let a hot bat-

tery cartridge cool down before charging it.

4. Charge the Nickel Metal Hydride battery car-

tridge when you do not use it for more than six

months.

ADDITIONAL SAFETY RULES FOR CLEANER

1. Do not pick up wet materials, lit cigarettes or the

like.

2. Stop operation immediately if you notice any-

thing abnormal.

3. If you drop or strike the cleaner, check it care-

fully for cracks or damage before operation.

4. Do not charge the cleaner close to dangerous

flammable materials such as gasoline, gas, paint

or adhesives.

5. Do not charge the cleaner on papers, cloth, car-

pet, vinyl, etc. This may cause a fire.

6. Do not charge the cleaner in a dusty place.

7. Be sure no one is below when using the cleaner

in high locations.

8. Do not bring close to stoves or other heat

sources.

9. Do not block the intake hole or vent holes.

SAVE THESE INSTRUCTIONS.

1 2 3 4 5 6 7 8 9 ... 31 32

Comments to this Manuals

No comments

Makita 4073D User Manual Page 4

Comments to this Manuals