Makita BLS712 User Manual download pdf (Page 17)

Socket wrench storage

The socket wrench is stored as shown in the figure. When

using the socket wrench, pull it out of the wrench holder.

After using the socket wrench, return it to the wrench holder.

Installing or removing saw blade

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before installing or

removing the blade.

• Use only the Makita socket wrench provided to install or

remove the blade. Failure to do so may result in

overtightening or insufficient tightening of the hex bolt.

This could cause an injury.

Lock the handle in the raised position by pushing in the stop-

per pin.

To remove the blade, use the socket wrench to loosen the

hex bolt holding the center cover by turning it counterclock-

wise. Raise the blade guard and center cover.

1. Arm

2. Wrench holder

3. Socket wrench

002200

1. Stopper Pin

002193

1. Blade Case

2. Hex bolt

3. Socket wrench

4. Blade guard

002215

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

Makita BLS712 User Manual Page 17