Makita AN943 User Manual download pdf (Page 2)

ENGLISH

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change

without notice.

• Note: Specifications may differ from country to country.

IMPORTANT SAFETY

INSTRUCTIONS

USB086-1

WARNING: WHEN USING THIS TOOL,

BASIC SAFETY PRECAUTIONS SHOULD

ALWAYS BE FOLLOWED TO REDUCE

THE RISK OF PERSONAL INJURY,

INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS.

1. For personal safety and proper operation and

maintenance of the tool, read this instruction

manual carefully before using the tool.

2. Always wear safety glasses to protect your eyes

from dust or nail injury. The safety glasses

should conform with the requirements of ANSI

Z87.1.

WARNING:

It is an employer's responsibility to enforce the

use of safety eye protection equipment by the

tool operators and by other persons in the imme-

diate working area.

3. Wear hearing protection to protect your ears

against exhaust noise and head protection. Also

wear light but not loose clothing. Sleeves should

be buttoned or rolled up. No necktie should be

worn.

4. Rushing the job or forcing the tool is dangerous.

Handle the tool carefully. Do not operate when

under the influence of alcohol, drugs or the like.

5. General Tool Handling Guidelines:

(1) Always assume that the tool contains fas-

teners.

(2) Do not point the tool toward yourself or any-

one whether it contains fasteners or not.

(3) Do not actuate the tool unless the tool is

placed firmly against the workpiece.

(4) Respect the tool as a working implement.

(5) No horseplay.

(6) Do not hold or carry the tool with a finger on

the trigger.

(7) Do not load the tool with fasteners when any

one of the operating controls is activated.

(8) Do not operate the tool with any power

source other than that specified in the tool

operating/safety instructions.

6. An improperly functioning tool must not be

used.

7. Sparks sometimes fly when the tool is used. Do

not use the tool near volatile, flammable materi-

als such as gasoline, thinner, paint, gas, adhe-

sives, etc.; they will ignite and explode, causing

serious injury.

8. The area should be sufficiently illuminated to

assure safe operations. The area should be clear

and litter-free. Be especially careful to maintain

good footing and balance.

9. Only those involved in the work should be in the

vicinity. Children especially must be kept away at

all times.

10. There may be local regulations concerning noise

which must be complied with by keeping noise

levels within prescribed limits. In certain cases,

shutters should be used to contain noise.

11. Do not play with the contact element: it prevents

accidental discharge, so it must be kept on and

not removed. Securing the trigger in the ON

position is also very dangerous. Never attempt

to fasten the trigger. Do not operate a tool if any

Model AN923 AN943

Air pressure

4.5 - 8.5 kgf/cm

G (65 - 120 PSIG)

Nail length 50 mm (2”) - 90 mm (3-1/2”)

Nail capacity 64 - 74 pcs. 60 - 84 pcs.

Min. hose diameter 8.5 mm (5/16”)

Dimensions (L X H X W)

559 mm X 347 mm X 109 mm

(22” X 13-11/16” X 4-1/4”)

455 mm X 365 mm X 109 mm

(17-7/8” X 14-3/8” X 4-1/4”)

Net weight 3.9 kg (8.7 lbs)

1 2 3 4 5 6 7 ... 27 28

Comments to this Manuals

No comments

Makita AN943 User Manual Page 2

Comments to this Manuals

Related products and manuals for Tools Makita AN943