Makita HR3210FCT Instruction Manual download pdf (Page 5)

Sound pressure level (L

) : 89 dB(A)

Sound power level (L

) : 100 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG215-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745-2-6:

Work mode : chiseling function

Vibration emission (a

h,CHeq

) : 7.5 m/s

Uncertainty (K) : 1.5 m/s

ENG303-1

Work mode : hammer drilling into concrete, 16 mm

diameter and 100 mm depth

Vibration emission (a

h,HD

) : 10 m/s

Uncertainty (K) : 1.5 m/s

ENG302-1

Work mode : drilling into metal

Vibration emission (a

h,D

) : 2.5 m/s

or less

For Model HR3210FCT

ENG102-1

For European countries only

Noise

The typical A-weighted noise level determined according

to EN60745-2-6:

Sound pressure level (L

) : 88 dB(A)

Sound power level (L

) : 99 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG215-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745-2-6:

Work mode : chiseling function

Vibration emission (a

h,CHeq

) : 8 m/s

Uncertainty (K) : 1.5 m/s

ENG303-1

Work mode : hammer drilling into concrete, 16 mm

diameter and 100 mm depth

Vibration emission (a

h,HD

) : 10 m/s

Uncertainty (K) : 1.5 m/s

ENG302-1

Work mode : drilling into metal

Vibration emission (a

h,D

) : 2.5 m/s

or less

ENH101-8

EC-DECLARATION OF CONFORMITY

Model; HR3200C,HR3210C,HR3210FCT

We declare under our sole responsibility that this

product is in compliance with the following standards of

standardized documents;

EN60745, EN55014, EN61000 in accordance with

Council Directives, 2004/108/EC, 98/37/EC.

CE2007

000230

Tomoyasu Kato

Director

Responsible Manufacturer:

Makita Corporation

3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN

Authorized Representative in Europe:

Makita International Europe Ltd.

Michigan Drive, Tongwell, Milton Keynes, Bucks MK15

8JD, ENGLAND

GEB007-2

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to rotary hammer safety rules. If you use this tool

unsafely or incorrectly, you can suffer serious

personal injury.

1. Wear ear protectors. Exposure to noise can

cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tools by insulated gripping

surfaces when performing an operation where

the cutting tool may contact hidden wiring or

its own cord. Contact with a "live" wire will make

exposed metal parts of the tool "live" and shock

the operator.

4. Wear a hard hat (safety helmet), safety glasses

and/or face shield. Ordinary eye or sun

glasses are NOT safety glasses. It is also

highly recommended that you wear a dust

mask and thickly padded gloves.

5. Be sure the bit is secured in place before

operation.

6. Under normal operation, the tool is designed

to produce vibration. The screws can come

loose easily, causing a breakdown or accident.

Check tightness of screws carefully before

operation.

7. In cold weather or when the tool has not been

used for a long time, let the tool warm up for a

while by operating it under no load. This will

loosen up the lubrication. Without proper

warm-up, hammering operation is difficult.

8. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

9. Hold the tool firmly with both hands.

10. Keep hands away from moving parts.

11. Do not leave the tool running. Operate the tool

only when hand-held.

12. Do not point the tool at any one in the area

when operating. The bit could fly out and

injure someone seriously.

13. Do not touch the bit or parts close to the bit

immediately after operation; they may be

extremely hot and could burn your skin.

14. Some material contains chemicals which may

be toxic. Take caution to prevent dust

inhalation and skin contact. Follow material

1 2 3 4 5 6 7 8 9 10 ... 55 56

Comments to this Manuals

No comments

Makita HR3210FCT Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Rotary hammers Makita HR3210FCT