Makita LXRM03 Instruction Manual download pdf (Page 7)

2. Select the desired waveband by pressing the Band

button. Make sure the soft bended rod antenna has

been well placed for best FM reception. Try to avoid

operating the radio next to a computer screen and

other equipment which will cause interference to the

radio.

3. Press and release the Auto Tune button and the radio

will search and stop automatically when it finds a radio

station. The radio will continue searching for the next

available station unless the operator presses the Auto

tune button to stop the scanning.

4. Rotate the Volume/Tuning Control/Select knob/button

to get the desired sound level. The LCD display will

show sound level changes.

Note:

Before operating the Tuning/Volume Control/Select

knob/button, press the Tuning/Volume control knob/

button to shift from the tuning control mode.

5. To turn off the radio, press and release the Power

button.

Manual Tuning - FM

1. Press and release the Power button to turn on the

radio.

2. Select the desired waveband by pressing the Band

button. Adjust the antenna as described above.

3. A single clockwise rotation of the Tuning/Volume

Control/Select knob/button will change the frequency

in the following increment:

FM: 50 or 100 kHz

Note:

If the radio is in the volume control status, press and

release the Tuning/Volume Control/Select knob/button

to shift to the tuning control mode.

4. Keep rotating the Volume/Tuning Control/Select knob/

button until the desired frequency is shown on the

display.

5. Rotate the Volume/Tuning Control/Select knob/button

to get the desired sound level.

6. To turn off the radio, press and release the Power

button.

Display modes - FM

Your radio has a range of display options for FM radio

mode.

1. Repeat pressing and releasing the Info button to cycle

through the different options.

a. Program station Indicates the name of the

station being listened to.

b. Radio text Indicates text messages such

as new items, etc.

c. Program type Indicates the type of station

being listened to such as Pop,

Classic, News, etc.

d. Time & date Indicates the current time and

date.

e. Frequency Indicates the frequency of the

FM signal.

Storing stations in preset memories (DAB

and FM)

There are five memory presets for each waveband.

1. Press and release the Power button to turn on the

radio.

2. Tune to the desired station using one of the methods

previously described.

3. Press and hold down the desired Preset button until

the radio beeps. The preset number will appear in the

display and the station will be stored in the selected

preset button.

4. Repeat this procedure for the remaining presets.

5. Stations stored in the preset memories can be

overwritten by following procedures described above.

Recall stations from the preset memories

(DAB and FM)

1. Press and release the Power button to turn on the

radio.

2. Select the desired waveband.

3. Press the desired Preset button momentarily, the

preset number and station frequency will appear in the

display.

Brightness control

The backlight of the display can be adjusted.

1. Press and release the Advanced setting button.

2. Rotate the Volume/Tuning Control/Select knob/button

to scroll through the Advanced setting until the display

shows “Backlight.” Press and release the Volume/

Tuning Control/Select knob/button to enter the setting.

3. Rotate the Volume/Tuning Control/Select knob/button

to choose for enabling or disabling the backlight

function, then press and release the Volume/Tuning

Control/Select knob/button to confirm the setting.

System reset

If your radio fails to work correctly, or some digits on the

display are missing or incomplete, carry out the following

procedure.

1. Press and release the Advanced setting button.

2. Rotate the Volume/Tuning Control/Select knob/button

until “Factory reset” appears on the display. Press and

release the Volume/Tuning Control/Select knob/button

to enter the setting.

3. Rotate the Volume/Tuning Control/Select knob/button

to choose “Yes” or “No.” Select “Yes” by pressing the

Volume/Tuning Control/Select knob/button and a full

reset will be performed.

How to play other audios

CAUTION:

Unplug this apparatus before connecting other

audios.

• There are the two AUX sockets. The AUX 1 is located

on the front panel, and the AUX 2 is located on the

battery compartment.

• Connect a stereo or mono source (i.e. iPod, MP3, or

CD player) to the AUX IN with an audio cord.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Makita LXRM03 Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Radios Makita LXRM03