Makita 5600DW Instruction Manual download pdf (Page 6)

Use

Rip

Fence.

Guard Against Kickback.

Always use a fence or straight edge guide when ripping.

Kickback occurs when the saw stalls rapidly and is driven back towards the

operator. Release switch immediately if blade binds or saw stalls. Keep blades

sharp. Support large panels as shown in Fig.

Use fence or straight edge

guide when ripping. Don‘t force tool. Stay alert exercise control. Don’t re-

move saw from work during a cut while the blade is moving.

Lower Guard. Raise lower guard with the retracting handle.

Adjustments. Before cutting be sure depth and bevel adjustments are tight.

Use Only Correct Blades

Mounting. Don’t use blades with incorrect size

IO.

Avoid Cutting Nails. Inspect for and remove all nails from lumber before

holes. Never use defective or incorrect blade washers or bolts.

11.

cutting.

When operating the saw, keep the

cord away from the cutting area

and position

that

will not be

caught on the workpiece during

the cutting operation.

Operate with proper hand support,

proper workpiece support, and

supply cord routing away from the

work area.

typical

illustration

proper hand

support, workpiece support, and

supply cord routing.

Fig.

WARN

is important to support the workpiece properly and to hold the saw firmly

to prevent

loss

control which could cause personal injury.

Fig.

illustrates

typical hand support

the saw.

1 2 3 4 5 6 7 8 9 10 11 ... 15 16

Comments to this Manuals

No comments

Makita 5600DW Instruction Manual Page 6

Comments to this Manuals

Related products and manuals for Power universal cutters Makita 5600DW