Makita HP2033 Instruction Manual download pdf (Page 5)

ENGLISH

Explanation of general view

1 Grip base

2 Side grip (auxiliary handle)

3Teeth

4Protrusions

5 Loosen

6 Tighten

7Bit

8 Chuck key

9Sleeve

10 Ring

11 Depth gauge

12 Switch trigger

13 Lock button

14 Reversing switch lever

15 Speed change knob

16 Action mode change knob

17 Blow-out bulb

18 Vent holes

SPECIFICATIONS

Model HP2032 HP2033 HP2034

Max. capacities

Concrete ................................................ High: 20 mm 20 mm 20 mm

Low: — — —

Steel ....................................................... High: 8 mm 8 mm 8 mm

Low: 13 mm 13 mm 13 mm

Wood ...................................................... High: 25 mm 25 mm 25 mm

Low: 40 mm 40 mm 40 mm

No load speed (min

-1

) ............................... High: 0 – 2,900 0 – 2,900 2,900

Low: 0 – 850 0 – 850 850

Blows per minute ...................................... High: 0 – 32,000 0 – 32,000 32,000

Low: 0 – 9,400 0 – 9,400 9,400

Overall length...................................................... 370 mm 368 mm 370 mm

Net weight........................................................... 2.5 kg 2.5 kg 2.5 kg

• Due to our continuing program of research and

development, the specifications herein are subject

to change without notice.

• Note: Specifications may differ from country to

country.

Power supply

The tool should be connected only to a power supply

of the same voltage as indicated on the nameplate,

and can only be operated on single-phase AC supply.

They are double-insulated in accordance with Euro-

pean Standard and can, therefore, also be used from

sockets without earth wire.

Safety hints

For your own safety, please refer to the enclosed

safety instructions.

SPECIFIC SAFETY RULES

GEB003-2

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to hammer drill safety rules. If you use this power

tool unsafely or incorrectly, you can suffer serious

personal injury.

1. Wear ear protectors with impact drills. Exposure

to noise can cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tools by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal

parts of the tool “live” and shock the operator.

4. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

5. Hold the tool firmly with both hands.

6. Keep hands away from rotating parts.

7. Do not leave the tool running. Operate the tool

only when hand-held.

8. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

9. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

OPERATING INSTRUCTIONS

Important:

Always be sure that the tool is switched off and

unplugged before installing or removing the side grip,

bit or other accessories.

Side grip (auxiliary handle) (Fig. 1)

Always use the side grip to ensure operating safety.

Install the side grip so that the teeth on the grip fit in

between the protrusions on the tool barrel. Then

tighten the grip by turning clockwise at the desired

position. It may be swung 360° so as to be secured at

any position.

1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments

Makita HP2033 Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools Makita HP2033