Makita HM1800 User Manual download pdf (Page 5)

FUNCTIONAL

DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool.

Switch action

CAUTION:

• Before plugging in the tool, always check to see that the switch lever

actuates properly and returns to the “OFF” position when released.

To start the tool, simply squeeze the switch lever. Release the switch lever to

stop.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and unplugged before

carrying out any work on the tool.

Installing or removing the bit

This tool accepts bits either with or without a collar on its shank.

To install the bit, follow either procedure (1) or (2) described below.

(1) For bits with a collar

Pivot the tool retainer back and slightly downward. Insert the bit into the

tool holder as far as it will go. To securely retain the bit, return the tool

retainer to its original position.

CAUTION:

• Always assure that the bit is securely retained by attempting to pull the

bit out of the tool holder after completing the above procedure.

1. Switch lever

002892

1. Bit with collar

2. Bit without coller

002928

1. Bit 2. Tool retainer

3. Tool holder 4. When the bit is inserted

5. When the bit is retained

Fig.(1)

002934

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Makita HM1800 User Manual Page 5