Makita HM1317CB Instruction Manual

1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE TH

10

11

12 Makita Corporation Anjo, Aichi, Japan 884923-224

2 ENGLISH SPECIFICATIONS Model HM1317C HM1307C HM1317CB HM1307CB Blows per minute 730 - 1,450 Overall length 715 mm 849 mm Net weight 17.0 kg 15.

3 ENG216-2 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745: Work mode : chiseling function with side handle

4 reduce risk of electric shock. 5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is

5 the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts o

6 For model HM1317C,HM1317CB only NOTE: • Blows at no load per minute becomes smaller than those on load in order to reduce vibration under no load

7 (1) For bits with a collar 12345 010293 To install the bit, follow either procedure (1) or (2) described below. Pivot the tool retainer back and s

8 For model HM1307C,HM1307CB only 12 010289 Remove the six screws using a hex wrench and remove the rear cover. 1 010290 Pull out the crank cap in

9 ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any oth