Makita BO4558 Instruction Manual download pdf (Page 5)

6. Some material contains chemicals which may

be toxic. Take caution to prevent dust

inhalation and skin contact. Follow material

supplier safety data.

7. Use of this tool to sand some products, paints

and wood could expose user to dust

containing hazardous substances. Use

appropriate respiratory protection.

8. Be sure that there are no cracks or breakage

on the pad before use. Cracks or breakage

may cause a personal injury.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and

unplugged before adjusting or checking function on

the tool.

Switch action

008302

CAUTION:

• Before plugging in the tool, always check to see

that the tool is switched off.

To start the tool, press the " I " side of the switch. To stop

the tool, press the " O " side of the switch.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and

unplugged before carrying out any work on the

tool.

Installing or removing abrasive paper

008299

Open the paper clamp by raising on the lever to release

from the locking port and then Insert the paper end into

the clamping part, aligning the paper edges even and

parallel with the sides of the base. (Bending the paper

beforehand makes attachment easier). Once the paper

is in place, return the lever to its original position.

008293

Repeat the same process for the other end of the base,

maintaining the proper paper tension.

After inserting the paper, make sure the clamping part

hold it securely. Otherwise the paper will be loose and

subject to slippage, resulting in uneven sanding

operation.

008297

When using the dust bag, make holes in the abrasive

paper using the punch plate as follows:

1. Set the tool upside down.

2. Place the punch plate over the abrasive paper so

that the bent sides of the punch plate are flush

with the paper edges.

3. Press the punch plate to make holes in the

abrasive paper.

1. Punch plate

2. Sandpaper

3. Guide

1. Switch

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Makita BO4558 Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for Power tools Makita BO4558