Makita 9045B Specifications download pdf (Page 7)

OPERATION

Sanding operation

CAUTION:

• Never run the tool without the abrasive paper. You may

seriously damage the pad.

• Never force the tool. Excessive pressure may decrease

the sanding efficiency, damage the abrasive paper or

shorten tool life.

Hold the tool firmly. Turn the tool on and wait until it attains

full speed. Then gently place the tool on the workpiece sur-

face. Keep the pad flush with the workpiece and apply slight

pressure on the tool.

MAINTENANCE

CAUTION:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection or

maintenance.

Replacing carbon brushes

Remove and check the carbon brushes regularly. Replace

when they wear down to the limit mark. Keep the carbon

brushes clean and free to slip in the holders. Both carbon

brushes should be replaced at the same time. Use only iden-

tical carbon brushes.

Use a screwdriver to remove the brush holder caps. Take out

the worn carbon brushes, insert the new ones and secure

the brush holder caps.

To maintain product SAFETY and RELIABILITY, repairs, any

other maintenance or adjustment should be performed by

Makita Authorized or Factory Service Centers, always using

Makita replacement parts.

003330

1. Limit mark

001145

1. Brush holder cap

2. Screwdriver

003345

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Makita 9045B Specifications Page 7