Makita 6918D Specifications download pdf (Page 8)

Reversing switch action

This tool has a reversing switch to change the direction of

rotation. Depress the reversing switch lever from the A side

for clockwise rotation or from the B side for counterclockwise

rotation.

When the reversing switch lever is in the neutral position, the

switch trigger cannot be pulled.

CAUTION:

• Always check the direction of rotation before operation.

• Use the reversing switch only after the tool comes to a

complete stop. Changing the direction of rotation before

the tool stops may damage the tool.

• When not operating the tool, always set the reversing

switch lever to the neutral position.

ASSEMBLY

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before carrying out any

work on the tool.

Selecting correct socket

Always use the correct size socket for bolts and nuts. An

incorrect size socket will result in inaccurate and inconsistent

fastening torque and/or damage to the bolt or nut.

Installing or removing socket

To install the socket, push it onto the anvil of the tool until it

locks into place.

To remove the socket, simply pull it off.

1. Reversing switch lever

002326

1. Socket

2. Anvil

002341

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

Makita 6918D Specifications Page 8