Makita G1200R Instruction Manual download pdf (Page 20)

PREPARATION FOR STORAGE

Remove fuel strainer cup, open fuel cock and completely drain fuel from tank.

-After draining fuel, reinstall strainer cup and close the fuel cock.

-Start and run the generator without an appliance connected until the carburetor is

completely empty of fuel.

Change old lubricating oil with fresh oil.

Clean air cleaner element.

Remove spark plug and pour

5-10

fl.oz.)

lubricating oil through the plug hole.

Then pull starter handle several times and reinstall the spark plug.

Check for loose bolts and nuts. Retighten

necessary.

Clean generator throughly and spray completely with a preservative spray if available.

Be sure to place engine switch at the

"STOP"

position.

Pull

starter handle until resistance is felt and leave it in that position.

Storage indoors in a well-ventilated, low humidity area is recommended.

CAUTION]

Extreme care must be taken when draining fuel tank. Never use water to clean the

generator.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Makita G1200R Instruction Manual Page 20