Makita AC310H Use and Care Manual download pdf (Page 7)

9. Drain water from air tank by opening drain cock valve

on bottom of tank. WATER WILL CONDENSE IN THE

AIR TANK. IF NOT DRAINED, WATER WILL

CORRODE AND WEAKEN THE AIR TANK CAUSING

A RISK OF AIR TANK RUPTURE.

Note:

If drain valve is plugged, release all air pressure. The

valve can then be removed, cleaned, then reinstalled.

10. After the water has been drained, close the drain

valve. The air compressor can now be stored.

WARNING

Drain Air Tank Properly. Improper draining of the air

tank can result in corrosion and possible bursting of

the tank. Tank bursting could lead to personal injury

and property damage.

MAINTENANCE

To ensure efficient operation and longer life of the air

compressor unit, a routine maintenance schedule should

be prepared and followed. The following routine

maintenance schedule is geared to a unit in a normal

working environment operating on a daily basis. If

necessary, the schedule should be modified to suit the

conditions under which your compressor is used. The

modifications will depend upon the hours of operation and

the working environment. Compressor units in an

extremely dirty and/or hostile environment will require a

greater frequency of all maintenance checks.

ROUTINE MAINTENANCE SCHEDULE

1. Drain water from the air tank, any moisture separators

or transformers.

2. Check for any unusual noise and/or vibration.

3. Manually check all safety valves to make sure they are

operating properly.

WARNING: Risk of bursting.

Check Safety Valve. If safety valve does not operate

properly over pressurization of the air tank may result

in rupture or explosion causing personal injury and

property damage.

4. Inspect air filter, replace if necessary.

5. Inspect air lines and fittings for leaks; correct as

necessary.

Each year of operation or if a problem is suspected:

• Check condition of air compressor pump intake and

exhaust valves.

• Check condition of check valve. Replace if

damaged or worn out.

6. Keep all screws, bolts, and covers tightly mounted.

Check their conditions periodically.

WARNING

Keep All Screws, Bolts and Covers Properly

Tightened. If screws plates or covers become loose

personal injury or property damage may occur.

MAKITA LIMITED ONE YEAR

WARRANTY EN0006-1

Warranty Policy

Every Makita tool is thoroughly inspected and tested

before leaving the factory. It is warranted to be free of

defects from workmanship and materials for the period of

ONE YEAR from the date of original purchase.

Should any trouble develop during this one year period,

return the COMPLETE tool, freight prepaid, to one of

Makita’s Factory or Authorized Service Centers. If

inspection shows the trouble is caused by defective

workmanship or material, Makita will repair (or at our

option, replace) without charge.

This Warranty does not apply where:

• repairs have been made or attempted by others:

• repairs are required because of normal wear and tear:

• the tool has been abused, misused or improperly

maintained:

• alterations have been made to the tool.

IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY

INDIRECT, INCIDENTAL OR CONSEQUENTIAL

DAMAGES FROM THE SALE OR USE OF THE

PRODUCT. THIS DISCLAIMER APPLIES BOTH

DURING AND AFTER THE TERM OF THIS WARRANTY.

MAKITA DISCLAIMS LIABILITY FOR ANY IMPLIED

WARRANTIES, INCLUDING IMPLIED WARRANTIES OF

“MERCHANTABILITY” AND “FITNESS FOR A SPECIFIC

PURPOSE,” AFTER THE ONE YEAR TERM OF THIS

WARRANTY.

This Warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above

limitation or exclusion may not apply to you.

Some states do not allow limitation on how long an

implied warranty lasts, so the above limitation may not

apply to you.

WARNING:

Never use the air compressor which is operating

abnormally.

If the air compressor appears to be operating

unusually, making strange noises or vibration,

stop using it immediately and arrange for repairs

by a Makita authorized service center.

WARNING:

Use only genuine Makita replacement parts.

Replacement parts not manufactured by Makita

may void your warranty and can lead to

malfunction and result in injuries. Genuine Makita

parts are available from an authorized dealer.

WARNING:

UNIT CYCLES AUTOMATICALLY WHEN

POWER IS ON. WHEN DOING MAINTENANCE,

YOU MAY BE EXPOSED TO VOLTAGE SOURCES,

COMPRESSED AIR OR MOVING PARTS.

PERSONAL INJURIES CAN OCCUR. BEFORE

PERFORMING ANY MAINTENANCE OR REPAIR,

UNPLUG THE COMPRESSOR AND BLEED OFF

ALL AIR PRESSURE.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comments to this Manuals

No comments

Makita AC310H Use and Care Manual Page 7

Comments to this Manuals

Related products and manuals for Air compressors Makita AC310H