Makita HP2051F User Manual download pdf (Page 4)

ENGLISH

Explanation of general view

1Grip base

2 Side grip (auxiliary handle)

3Teeth

4 Protrusions

5 Loosen

6Tighten

7Bit

8 Chuck key

9Sleeve

10 Ring

11 Depth gauge

12 Lower

13 Higher

14 Speed control screw

15 Switch trigger

16 Lock button

17 Reversing switch lever

18 Lamp

19 Speed change knob

20 Arrow

21 Action mode changing lever

22 Blow-out bulb

23 Vent holes

Model HP2050/HP2050F HP2051/HP2051F

Max. capacities

Concrete

Tungsten-carbide tipped bit..................................High: 20 mm 20 mm

Steel ........................................................................High: 8 mm 8 mm

Low: 13 mm 13 mm

Wood .......................................................................High: 25 mm 25 mm

Low: 40 mm 40 mm

No load speed (min

-1

) .............................................High: 0 – 2,900 0 – 2,900

Low: 0 – 1,200 0 – 1,200

Blows per minute .....................................................High: 0 – 58,000 0 – 58,000

Low: 0 – 24,000 0 – 24,000

Overall length...........................................................362 mm 360 mm

Net weight................................................................2.3 kg 2.3 kg

• Due to our continuing programme of research and

development, the specifications herein are subject to

change without notice.

• Note: Specifications may differ from country to country.

Intended use

The tool is intended for impact drilling in brick, concrete

and stone as well as for drilling without impact in wood,

metal, ceramic and plastic.

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

Safety hints

For your own safety, please refer to the enclosed safety

instructions.

SPECIFIC SAFETY RULES

GEB003-2

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to hammer drill safety rules. If you use this power

tool unsafely or incorrectly, you can suffer serious

personal injury.

1. Wear ear protectors with impact drills. Exposure

to noise can cause hearing loss.

2. Use auxiliary handles supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tools by insulated gripping surfaces

when performing an operation where the cutting

tool may contact hidden wiring or its own cord.

Contact with a “live” wire will make exposed metal

parts of the tool “live” and shock the operator.

4. Always be sure you have a firm footing.

Be sure no one is below when using the tool in

high locations.

5. Hold the tool firmly with both hands.

6. Keep hands away from rotating parts.

7. Do not leave the tool running. Operate the tool

only when hand-held.

8. Do not touch the bit or the workpiece immedi-

ately after operation; they may be extremely hot

and could burn your skin.

9. Some material contains chemicals which may be

toxic. Take caution to prevent dust inhalation

and skin contact. Follow material supplier safety

data.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

OPERATING INSTRUCTIONS

Installing side grip (auxiliary handle) (Fig. 1)

CAUTION:

Always be sure that the tool is switched off and

unplugged before installing or removing the side grip.

Always use the side grip to ensure operating safety.

Install the side grip so that the teeth on the grip fit in

between the protrusions on the tool barrel. Then tighten

the grip by turning clockwise at the desired position. It

may be swung 360° so as to be secured at any position.

Installing or removing drill bit (Fig. 2 & 3)

CAUTION:

Always be sure that the tool is switched off and

unplugged before installing or removing the bit.

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Makita HP2051F User Manual Page 4

Comments to this Manuals

Related products and manuals for Power tools Makita HP2051F